X431 Creader Use Tips,Good Launch tool X431 Creader Scannner

CreaderV is newly developed by LAUNCH, specially designed for car 

owners or DIYs to diagnose any vehicle that is compliant to OBDII/EOBD.
It not only can read/clear DTCs, but also can read live data in 2 modes,
and perform many special tests.




This Tool's function:

Large OBD2 database built in, displays the trouble code on the screen (P code and definition)
View live streaming data from engine sensors and O2/lambda Sensors in graph or digital form
Easy to use, robust tool suitable for workshop or DIY mechanic
Plug and play technology, no external power needed
Supplied with 16 pin OBD2 connector, lead, USB update cable




Launch x431 creader is one of the obd 2 tools:

Here is the OBD 2 system introduction and the creader v use tips:
OBD II systems must indicate whether or not the vehicle’s PCM’s monitor
system has completed testing on each component. Components that
have been tested will be reported as “Ready”, or “Complete”, meaning
they have been tested by the OBD II system. The purpose of recording
readiness status is to allow inspectors to determine if the vehicle’s OBD II
system has tested all the components and/or systems.
The powertrain control module (PCM) sets a monitor to “Ready” or
“Complete” after an appropriate drive cycle has been performed. The
7LAUNCH                              
CreaderV User’s Manual
drive cycle that enables a monitor and sets readiness codes to “Ready”
varies for each individual monitor. Once a monitor is set as “Ready” or
“Complete”, it will remain in this state. A number of factors, including
erasing of diagnostic trouble codes (DTCs) with a code reader or a
disconnected battery, can result in Readiness Monitors being set to “Not
Ready”. Since the three continuous monitors are constantly evaluating,
they will be reported as “Ready” all of the time. If testing of a particular
supported non-continuous monitor has not been completed, the monitor
status will be reported as “Not Complete” or “Not Ready.”
In order for the OBD monitor system to become ready, the vehicle should
be driven under a variety of normal operating conditions. These
operating conditions may include a mix of highway driving and stop and
go, city type driving, and at least one overnight-off period. For specific
information on getting your vehicle’s OBD monitor system ready, please
consult your vehicle owner’s manual.
So this tool can help you to fault your car ,Many videos has introduced the tool and the function of the launch x431 creader, you can see the video to get more knowledge about it.
More Relative X431 Tools you can see the list:

Launch Handheld KES200 Engine Analyzer
X-431 DIAGUN
aunch X431 Diagun Red Box
Launch X431 Diagun pda only
Smart Box for Master
X-431 Top Without Sungsang Computer
Launch X431 - Cresetter
Launch X431 Can-Bus II Connector
Launch X431 - OBD BOOK 6830