AD90 Key Pro - AD 90 Key Programmer Use Guidance and Tips

AD90 Key Programmer - Good Auto Key Programmer
so you know the AD 90 key programmer rightly , this auto key programmer is one of the most popular auto key programmer but do you know how to use this key pro?
I think most of us don't know how to use it ,you can see this tool here:

And after you have know this car diagnostic tool you will use it well. 

The AD 90 key programmer function :

Identify transponder
Copy transponder
Software update from Internet
Usable with PC software
Available to be used with the Chip Decoder System
AD90 Key Programmer can detect,read and duplicate Philips,Megamos,Temic and Texas transponders
Reads fixed code transponders:
Philips PCF7930/31 C Silca 33,73
Philips PCF79 35 40,41,42,44,45
Temic C Silca 11, 12
Megamos C Silca 13
Silca T5
Texas C Silca 4C
Recognises:
Megamos crypto C Silca 48,
Philips crypto C Silca 46
Texas crypto 4D (60 universal, 61 Mitsubishi, 62 Mitsubishi, 63 Ford, 64 Renault before year 2000, Chrysler, Jeep, 65 SUZUKI, 66 SUZUKI, 67 TOYOTA/LEXUS, 68 TOYOTA/LEXUS2, XX new or universal) NEW!!
Fixed 11,12,13,33,73,4C,T5
Crypto 40,41,42,44,45,4D,48
Rolling + Crypto 46
Copies:
11,12 Temic
13 Megamos
33
42 NEW!!
4C Texas
T5 20 Nova

More about the AD 90 Key Pro:

The AD90 Key Programmer in addition has major features such as copying of Crypto 42 type transponders and the Texas 4C and 4D transponders. These are additional options but make the AD90 a powerful tool.
The AD90 has been developed to allow for future developments and to keep up to date with the ever expanding technology of transponders within the Automotive vehicle systems.
As well as Transponder systems, the AD90 will also be developed to offer new and exciting facilities which will further advance its capabilities.
The machine of the future for transponder developments, is the AD90...

Next is the use guide:

the catalog:

1.0 GENERAL INFORMATION 1 

2.0 GENERAL OPERATION 2 

3.0 CRYPTO TRANSPONDER INTERFACE 5 

4.0 PC PROGRAM OPERATION 10 

5.0 TRANSPONDER INFORMATION 13 

6.0 TRANSPONDER TYPES 14 

7.0 SOFTWARE UPDATING 15 

8.0 SPECIFICATION 16 

CRYPTO TRANSPONDER 

INTERFACE 

NOTE: Before starting the copying procedure, please make sure that your 

AD90 software version is 3.14 or higher. If not please contact your distributor 

for assistance.

Connect the hardware together as shown below. 

1. Connect the power supplies to the AD90 and the Crypto Transponder 

Interface. The green and red LEDs will illuminate for one second and then 

extinguish. 

NOTES: 

i) If non-original power supplies are used for the AD90 or the Crypto 

Transponder Interface the warranty will be invalid. 

ii) Please check that there is nothing that may short circuit the devices when 

they are connected to the power supplies. 

2. Insert the key into the AD90 key reader. 

3. Press the ‘Read’ key on the Crypto Transponder Interface, the green LED 

will illuminate and will remain on throughout the reading procedure. 

4. Once the transponder code has been recorded, the green LED will start to 

flash. Remove the original transponder from the AD90 and insert the new 

transponder/key into the AD90 key reader. 

5. Press the ‘Write’ key on the Crypto Transponder Interface, the green LED 

will illuminate and will remain on throughout the writing procedure. 

6. Once the copying procedure is completed, the green LED will extinguish and 

the key/transponder can be removed from the key reader. 

The end you should know some details about the AD 90 key pro:

Width 200 mm

Height 70 mm

Depth (Length) 150 mm

Weight 0,9 kg

POWER SUPPLY

External power supply 100/250 V - 47/63 Hz

Absorption 0,3 A

Type of power supply unit 9 to 12volts

TECHNOLOGY FEATURES

Field frequency of key insertion 

slot

125 kHz

Interface Serial port RS232 & USB

Working temperature -5°C to 40°C

If you like this AD 90 Key Programmer ,you can contac us : kingstar@vtoolshop.com

or go to vtoolshop.com

.