FORD/MAZDA - F4A-EL/F4EAT UPSHIFTS 1-3 IN DRIVE

COMPLAINT:
Vehicles equipped with F4A-EL or F4EAT exhibit, what seems like, a 1-3 upshift in the “Overdrive” or “Drive  ranges after overhaul.

CAUSE:
The cause may be, the 1-2 shift solenoid wire was placed into the Lock- up Solenoid and the Lockup Solenoid wire was placed into the l-2 Shift Solenoid. When the solenoids are connected backwards it produces a 1 -Lockup-3 upshift.

CORRECTION:
Refer to the color code and solenoid application chart in Figure 1 to correctly identify and connect each solenoid.

More ford and mazda tools like ford km tool and Ford MAZDA 4D63 Chips, you can find from www.vtoolshop.com.

FORD A4LD CONTINUOUS FRONT SEAL LEAKS

CONTINUOUS FRONT SEAL LEAKS,PREMATURE CONVERTER HUB WEAR,PREMATURE PUMP GEAR DAMAGE,ON 2.8L, 2.9L AND 4.0L ENGINES ONLY
elm327
COMPLAINT:
After rebuild, continuous leaks from the front pump seal area, possibly premature bushing
wear and/or wear on the torque converter hub seal area, and in extreme cases may exhibit
premature front pump gear breakage. The complaint may be any or all of the above,
depending on the extent of the wear.

CAUSE:
The cause may be a “Crankshaft to Flywheel Spacer” worn in the area that supports the
torque converter pilot hub, allowing a mis-alignment of the torque converter to pump, on
models equipped with 2.8L, 2.9L and 4.0L engines only.

CORRECTION:
Inspect the “Crankshaft to Flywheel Spacer” for any abnormal wear and replace as
necessary. Refer to Dimension “A” in Figure 1 to measure the spacer. Dimension “A” on a
new spacer is .750”, and the OEM part number is D4ZZ-6434-A.

SERVICE INFORMATION:
Crankshaft to Flywheel Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D4ZZ-6434-A

 

From www.vtoolshop.com, you can find more hot car tools such vag com 409.1 as vag k can and for help.

All about CAT concerned products at vtoolshop

There are many CAT concerned products at vtoolshop hot selling at vtoolshop : CAT CATerpillar ET Diagnostic Adapter, CAT ET Adapter III with SIS,CATerpillar SIS 2012,CAT CATerpillar ET Diagnostic Adapter.
All of these  CAT CATerpillar ET Diagnostic Adapter, CAT ET Adapter III with SIS,CATerpillar SIS 2012,CAT CATerpillar ET Diagnostic Adapter are at surprising low price while the high quality and good price is the main reason for their popular.

• CAT CATerpillar ET Diagnostic Adapter Description:

CAT Caterpillar ET Diagnostic Adapter retrieve engine totals for fuel used, miles traveled, and hours Operated.
CAT Caterpillar ET Diagnostic Adapter display status of all parameters, such as engine speed, Throttle position, timing advance, fuel flow, etc.
Available languageof CAT Caterpillar ET Diagnostic Adapter:
Chinese (simplified)
Danish
English (United States)
French (France)
German (Germany)
Italian (Italy)
Japanese
Portuguese (Portugal)
Spanish (Traditional Sort)
CAT Caterpillar ET Functions:
- Display “Logged Event Codes” to show engine over speeds,High temperatures, fuel consumption, etc.
- View ECM’s current configuration and change user settings
- Perform diagnostic tests and calibrations, and calibrate
- Electro-mechanical and electro-hydraulic components
- Context sensitive help leads operator through every task Cat ET can perform
- Data Logger and Data Log Viewer allows recording of ECM signals for delayed troubleshooting capability.
CAT Caterpillar ET Packing list:
- CAT main unit
- USB cable
- interface cables
- Case

• CAT ET Adapter III Description:

CAT ET Adapter III with SIS  is for a brand new, never used CAT Communication Adapter III. It is the latest generation of the CAT Communication Adapter group, and replaces the CAT Comm Adapter II. This is the only recommended communication device for CAT, and the only datalink device that will allow you to properly communicate with a CAT engine on dual datalinks. This function is needed for some CAT ET (Electronic Technician) functions.
Once you buy this item, we’ll give you a license key ,you can use it forever. It never expires,you needn’t worry to pay extra fees to activate every year!
CAT ET Adapter III Features:
CAT Communication Adapter III Comm 3 p/n
Model:JIU-T-1049
Introduction:CAT Communication Adapter III Comm 3 p/n 317-7484
Price:Best Price
Details
CAT Communication Adapter III Comm 3 p/n 317-7484
CAT ET Adapter III Comm 3 p/n 317-7484
Caterpillar Communication Adapter III
CAT Comm Adapter III
CAT Comm Adapter 317-7485
Software Version: 2011A (If you need software in 2012 version, the price is different)
Languages: Danish, English, French, German, Italian, Japanese, Portuguese and Spanish.
It is the latest generation of the CAT Communication Adapter group, and replaces the CAT Comm Adapter II.
This is the only recommended communication device for CAT, and the only datalink device that will allow you to properly communicate with a CAT engine on dual datalinks.
This function is needed for some CAT ET (Electronic Technician) functions.
CAT ET Adapter 3 Communication:
Allows communication between service tools and engine controls using various data links such as J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks;
Flash program allows adapter firmware upgrades as additional features become available;
Uses J1939/11, high-speed data link (part of ADEM III controls), substantially reducing flash times;
Automatically selects J1939/11 when flashing the engine (reduces the flash time approximately 80%, from 14 minutes to 3 minutes).
Software:
Designed to run with Microsoft Windows 95, 98, 2000, NT and XP
Ready to use, just install software program onto PC using provided CD
The PC-based service tools from Caterpillar provide the capability to access Electronic Control Modules (ECMs) from a personal computer. Many job-critical tasks can be performed with an electronic service tool. The user can display the status of a group of parameters (temperatures, pressures, etc.) simultaneously, view active and clear logged diagnostics, display the current configuration of an ECM and much more. The service tool works with a communication adapter to allow connection to an ECM. A graphical interface makes this software quick to learn and easy to use. The version and identification of the ECM is automatically retrieved and is displayed on a summary screen when the program is started. Diagnostic tests and calibrations can also be performed.
Caterpillar PC-based tools enable service technicians to reprogram ECMs, reconfigure control system parameters, fine tune performance or diagnose the root cause of a failure the first time. These powerful tools allow service personnel to display and analyze vital performance and health information from any system quickly and accurately. The service tool communicates with any system using ATA (J1708), J1939 or the Caterpillar proprietary data link networks. The service tools provide information and features needed to help a technician diagnose problems and perform repairs and to customize and personalize the operation of a product. By allowing customers to design flexibility and configurability into a product, Caterpillar service tools stretch beyond the capabilities of preprogrammed ECMs or onboard display systems.
Features:
Display graph and log status parameters.Retrieve prognostic data including histograms, engine totals for fuel used and miles traveled.View active diagnostics and clear logged diagnostics. View events where irregularities have occurred and have been logged by the ECM.Perform calibrations to enhance performance of the ECM.Customize the ECM with application-specific settings.Over 100 custom Diagnostic, Information and Service features including:2D and 3D Histogram plotting capability (engine software support required).Custom Status screen groupsSnapshots (Download and display snapshot data recorded by the ECM)Configuration Aid that allows upload/download of same configuration to multiple control modulesCustomized Service Tool OptionsCustomized service tool nameCustomized graphics for the splash screen and iconsCustomized installationAftermarket differentiation, the tool for one customer does not work on the product of another customer.Licensing options for customer managementFlash programming of the ECM(s)Training demonstration allows familiarity with the toola s primary functions without connecting to ECM(s)Major operating systems support (Microsoft Windows 95, 98, NT 4.0, 2000, ME, & XP)Perform customized diagnostic tests to identify harness problems, cylinder or component failures (Automatic Cylinder Cutout with cylinder to cylinder fueling comparison)
CAT ET Adapter III Package including:
-CAT Comm Adapter III
-CD for installing the drivers
-USB Cable (From device to your computer)
-J1939/J1708 Cable (from device to your truck)
-Hard CARTON with foam inserts
-2011A software DVD (If you need 2012 version software, the price is different.)
-1 License key
-1 SIS Hard Disc
CAT ET Adapter III FAQ:
Q1: Is the Cat Comm III compatable with the software CAT caterpillar ET 2011B Is this an actual caterpillar part or a knock off? Thanks
A1: Yes, this is actually the genuine CAT adapter, It is also the ONLY recommended adapter for CAT ET, but obviously other ones will work. It will work fine for the version you have, and 2011C is actually the newest version.
Q2: What is the difference between a cat comm II & Cat Comm III. Is one just a usb connection and one serial? Also, will this unit work with my Cat 3126B marine units? Seriel no. 3GS01797 Thanks
A2: CAT Comm II was a serial port model, but since computers are no longer made with serial ports, they changed the design to a USB and called it a CAT Comm III. So you are correct. This unit works with all CAT engines — Marine, on-highway, and off-highway. On Marine units, I’m not sure where they put the plug, but it should be somewhere near the ECM (Typically). It should be either a 6 pin or 9 pin connector.
Q3: Does this work with CAT 3500 natural gas engines and 3600 natural gas engines? Thanks.
A3: If those programs use CAT Electronic Technician (CAT ET) for the software, it will work.
Q4: Can the cat communicate 3 also be used to read detroit and cummins engines if I have the correct software?
A4: Yes, it reads both J1708 and J1939 so it can read both of those. Keep in mind that this adapter only comes with the J1939 adapter end, so I would recommend purchasing the J1708 adapter end from me as well if you plan on connecting to some older stuff.
Q5: will this unit allow me all access to the ecm to alter all areas eg set speed limiter to a lower speed and is there a yearly lic fee.
A5: This device is what you should use if you will be hooking up to both off-highway & on-highway CAT engines. If you are strictly wanting to work on on-highway CAT engines, I would rather see you purchase a Nexiq USB Link .The Nexiq USB Link is universal (Works with CAT, Cummins, Detroit, Allison, etc…), it is cheaper, plus it has bluetooth so you can go wireless.
Q6: want to compare the communicator and some caterpillar ECMS could tell me if it works with them.
A6: This item works with all CAT ECMS — Off Road and On Highway, trucks and equipment

• Caterpillar SIS 2012 Description:

Caterpillar SIS 2012 electronic spare parts catalog Caterpillar, parts book, workshop service repair manual Caterpillar, electrical wiring and hydraulic schematic diagram, operation & maintenance manual Cat, troubleshooting manual.
Caterpillar SIS STW ET 2012 Workshop Information System include:
Caterpillar Parts Book
Caterpillar Workshop Service Manual
Caterpillar Operation & Maintenance Manual
Caterpillar Special Instructions
Cat Engine Performance Specs
Cat Test Results for all Cat Equipment
Cat Tool Information Guide
Caterpiller Parts Information and New Parts Inquiry
Caterpillar SIS STW ET 2011A Contents
Caterpillar disc #1: Industrial engines
Caterpillar disc #2: Electric power generation
Caterpillar disc #3: Marine engines, petroleum products, truck engines
Caterpillar disc #4: Excavators, oem products
Caterpillar disc #5: Excavators, oem products
Caterpillar disc #6: Pipelayers, track type tractors
Caterpillar disc #7: Integrated toolcarriers, wheel type loaders, wheel tractor scrapers
Caterpillar disc #8: Wheel type loaders
Caterpillar disc #9: Articulated dump trucks, load haul dump, machine control guidance products, off highway trucks, underground articulated trucks, on highway trucks
Caterpillar disc #10:Backhoe loaders, challengers, combines, mini excavators, skid steer loaders, tillage, telscopic material handlers, work tools
Caterpillar disc #11:Asphalt pavers, cold planers, compactors, motor graders, road reclaimers
Caterpillar disc #12:Excavators
Caterpillar disc #13:Track type tractors
This is the Version: 2012.1
If needs Version: 2012.7 (should add $180)
We are a leading car diagnostic tool supplier, professional wholesaler of car diagnostic tool, can supply all kinds of auto diagnostic tools with the best pirce, great quality and desired aftersales service, if you need car diagnostic tool, we will be your good choice.

Details of CAT Caterpillar ET Diagnostic Adapter III with SIS

CAT Caterpillar ET Diagnostic Adapter III with SIS is a fuel employed diagnostic tool which has excellent performance in troubleshooting. It can be used by lots of CAT truck owners and is received high praise. Bluetooth CAT ET has complete diagnostic functions which enable you to do far more upkeep works and conserve revenue. As following I would like display you two highlight attributes of CAT ET.

1. Bluetooth CAT ET can show all operating conditions including transmission shift counts, more than speed and so on. This function will make you know your truck clearer and hold your truck from above issues which will trigger a higher repair fees.
2. CAT Caterpillar Adapter III is extremely hommization. You needn’t to be concerned its operation, because it makes it possible for you practice utilizing Cat ET without any communications adapter or electronic. This function is known as “ET trainer” which is really comfort to users.

CAT ET Adapter III is for a brand new, never used CAT Communication Adapter III.

It is the latest generation of the CAT Communication Adapter group, and replaces the CAT Comm Adapter II. This is the only recommended communication device for CAT, and the only datalink device that will allow you to properly communicate with a CAT engine on dual datalinks. This function is needed for some CAT ET (Electronic Technician) functions.
Once you buy this item, we’ll give you a license key ,you can use it forever. It never expires,you needn’t worry to pay extra fees to activate every year!
CAT ET Adapter III Features:
CAT Communication Adapter III Comm 3 p/n
Model:JIU-T-1049
Introduction:CAT Communication Adapter III Comm 3 p/n 317-7484
Price:Best Price
Details
CAT Communication Adapter III Comm 3 p/n 317-7484
CAT ET Adapter III Comm 3 p/n 317-7484
Caterpillar Communication Adapter III
CAT Comm Adapter III
CAT Comm Adapter 317-7485
Software Version: 2011A (If you need software in 2012 version, the price is different)
Languages: Danish, English, French, German, Italian, Japanese, Portuguese and Spanish.
It is the latest generation of the CAT Communication Adapter group, and replaces the CAT Comm Adapter II.
This is the only recommended communication device for CAT, and the only datalink device that will allow you to properly communicate with a CAT engine on dual datalinks.
This function is needed for some CAT ET (Electronic Technician) functions.
CAT ET Adapter 3 Communication:
Allows communication between service tools and engine controls using various data links such as J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks;
Flash program allows adapter firmware upgrades as additional features become available;
Uses J1939/11, high-speed data link (part of ADEM III controls), substantially reducing flash times;
Automatically selects J1939/11 when flashing the engine (reduces the flash time approximately 80%, from 14 minutes to 3 minutes).
Software: 
Designed to run with Microsoft Windows 95, 98, 2000, NT and XP
Ready to use, just install software program onto PC using provided CD
The PC-based service tools from Caterpillar provide the capability to access Electronic Control Modules (ECMs) from a personal computer. Many job-critical tasks can be performed with an electronic service tool. The user can display the status of a group of parameters (temperatures, pressures, etc.) simultaneously, view active and clear logged diagnostics, display the current configuration of an ECM and much more. The service tool works with a communication adapter to allow connection to an ECM. A graphical interface makes this software quick to learn and easy to use. The version and identification of the ECM is automatically retrieved and is displayed on a summary screen when the program is started. Diagnostic tests and calibrations can also be performed.
Caterpillar PC-based tools enable service technicians to reprogram ECMs, reconfigure control system parameters, fine tune performance or diagnose the root cause of a failure the first time. These powerful tools allow service personnel to display and analyze vital performance and health information from any system quickly and accurately. The service tool communicates with any system using ATA (J1708), J1939 or the Caterpillar proprietary data link networks. The service tools provide information and features needed to help a technician diagnose problems and perform repairs and to customize and personalize the operation of a product. By allowing customers to design flexibility and configurability into a product, Caterpillar service tools stretch beyond the capabilities of preprogrammed ECMs or onboard display systems.
Features:
Display graph and log status parameters.Retrieve prognostic data including histograms, engine totals for fuel used and miles traveled.View active diagnostics and clear logged diagnostics. View events where irregularities have occurred and have been logged by the ECM.Perform calibrations to enhance performance of the ECM.Customize the ECM with application-specific settings.Over 100 custom Diagnostic, Information and Service features including:2D and 3D Histogram plotting capability (engine software support required).Custom Status screen groupsSnapshots (Download and display snapshot data recorded by the ECM)Configuration Aid that allows upload/download of same configuration to multiple control modulesCustomized Service Tool OptionsCustomized service tool nameCustomized graphics for the splash screen and iconsCustomized installationAftermarket differentiation, the tool for one customer does not work on the product of another customer.Licensing options for customer managementFlash programming of the ECM(s)Training demonstration allows familiarity with the toola s primary functions without connecting to ECM(s)Major operating systems support (Microsoft Windows 95, 98, NT 4.0, 2000, ME, & XP)Perform customized diagnostic tests to identify harness problems, cylinder or component failures (Automatic Cylinder Cutout with cylinder to cylinder fueling comparison)
CAT ET Adapter III Package including:
-CAT Comm Adapter III
-CD for installing the drivers
-USB Cable (From device to your computer)
-J1939/J1708 Cable (from device to your truck)
-Hard CARTON with foam inserts
-2011A software DVD (If you need 2012 version software, the price is different.)
-1 License key
-1 SIS Hard Disc
CAT ET Adapter III FAQ:
Q1:  Is the Cat Comm III compatable with the software CAT caterpillar ET 2011B Is this an actual caterpillar part or a knock off? Thanks
A1: Yes, this is actually the genuine CAT adapter,  It is also the ONLY recommended adapter for CAT ET, but obviously other ones will work. It will work fine for the version you have, and 2011C is actually the newest version.
Q2:  What is the difference between a cat comm II & Cat Comm III. Is one just a usb connection and one serial? Also, will this unit work with my Cat 3126B marine units? Seriel no. 3GS01797 Thanks
A2:  CAT Comm II was a serial port model, but since computers are no longer made with serial ports, they changed the design to a USB and called it a CAT Comm III. So you are correct. This unit works with all CAT engines — Marine, on-highway, and off-highway. On Marine units, I’m not sure where they put the plug, but it should be somewhere near the ECM (Typically). It should be either a 6 pin or 9 pin connector.
Q3: Does this work with CAT 3500 natural gas engines and 3600 natural gas engines? Thanks.
A3: If those programs use CAT Electronic Technician (CAT ET) for the software, it will work.
Q4: Can the cat communicate  3 also be used to read detroit and cummins engines if I have the correct software?
A4:  Yes, it reads both J1708 and J1939 so it can read both of those. Keep in mind that this adapter only comes with the J1939 adapter end, so I would recommend purchasing the J1708 adapter end from me as well if you plan on connecting to some older stuff.
Q5:  will this unit allow me all access to the ecm to alter all areas eg set speed limiter to a lower speed and is there a yearly lic fee.
A5: This device is what you should use if you will be hooking up to both off-highway & on-highway CAT engines. If you are strictly wanting to work on on-highway CAT engines, I would rather see you purchase a Nexiq USB Link .The Nexiq USB Link is universal (Works with CAT, Cummins, Detroit, Allison, etc…), it is cheaper, plus it has bluetooth so you can go wireless.
Q6: want to compare the communicator and some caterpillar ECMS could tell me if it works with them.
A6: This item works with all CAT ECMS — Off Road and On Highway, trucks and equipment
Some hot ones like suzuki gs500,mitchell ondemand you can find from www.vtoolshop.com.

Original DigiMaster III of high quality at vtool

Original DigiMaster III Comprehensive upgrade! New Technology, New Features, New Experience!
Digimaster 3  (D3) includes all functions of digiprog 3 (DIGI3)!
Besides, D3 adds the Benz/BMW/Porsch key programming function.
Also D3 supports to adjust the instrument on BENZ new models via OBDII diagnostic connector directly, such as W221, W164, W251, W216, W204,
W212.
QUESTION: WHAT ABOUT UPDATE? IS IT FULL FREE?
ANSWERS:
1. All present cars have unlimited tokens
2. Free software update for all cars, CPUs, Chips
3. For new added cars or CPUs, you should buy tokens
4. For new added chips for present cars, you don’t need buy tokens
Some Technical Features for DigiMaster-III:
Super Safety- Safety standard with “bank level”Intelligent Operation Platform-Based on CE 6.0 embedded operating system, it applies intelligent network platform.
Flexible Investment- The innovative consumption of “Pay As You Go” cost you zero in hardware. Users can choose buy out the modules or pay-per use plan.
Perfect man-machine interface- Based on IE core technology, It is UNICODE encoding, supports many language around the world.
Strong Aftersale Support- Network online technical support, the safe, efficient and thoughtful technology support is the best in this field.
Matching Operations All in One- Original automatic mode which the matching operations all in one, multi-language operation, the key matched at one go, effectively ensure the security of read and write data.
Mobile HD Touch Screen- Adopt 800 * 480 digital high-definition color screen and precise touch technology; achieve mobile processes of business, no need to connect to the computer.
Fully support more than 1000 European, Asian and Chinese domestic cars, new models can be upgraded at any time. Some of the models are as follows:

• Support OBD-II interface odometer adjustment of Volkswagen, Audi, Benz, BMW and BMW 7 Series models: E65 CAS and the 2009 Audi A6L and Q7.
• Read BMW CAS1/ 2/ 3 data by CAN interface.
• Online reading BMW CAS1/ 2/ 3/ 3+/ 4, Mercedes-Benz EIS EEPROM and FLASH data by BDM.
• Support the Mercedes-Benz S, C, E, odometer and EIS adjustment; Porsche, Ferrari, Bentley and other European luxury cars odometer adjustment; Chinese domestic car MCU and engineering machinery odometer adjustment;
• Support the MOTOROLA/FREESCALE series CPU (including some CPU flash) data read and write.
• Support key programming for Mercedes Benz and BMW series cars.

Newly added automatic model for key programming for high-class car!
- Odometer Correction
European American Japanese and Korean
Alfa Cadillac Daihatsu
Aston Martin Chrysler Honda
Audi Ford Hyundai
Bentley GMISUZU
BMW Lincoln KIA
Benz Lexus
Citroen Mazda
FIAT Mitsubishi
Ferrari Nissan
Jaguar Proton
Lamborghini SSangYong
Lancia Subaru
Lotus SUZUKI
Man Toyota
Opel
peugeot
Porsche
Renault
Rover
Saab
Skoda
Volvo
Volkswagen
Wiesmann
Truck
Forkman
Maserati
Other vehicle Motorcycle Truck
- Audio Decoding
Audio
- Airbag Resetting
Airbag-Audi Airbag-Mitsubishi
Airbag-Chrysler Airbag-Nissan
Airbag-China Airbag-Opel
Airbag-Citroen Airbag-Peugeot
Airbag-FIAT Airbag-Renault
Airbag-Ford Airbag-Rover
Airbag-GM Airbag-SSangYong
Airbag-Honda Airbag-Subaru
Airbag-Hyundai Airbag-SUZUKI
Airbag-KIA Airbag-Toyota
Airbag-Mazda Airbag-Volkswagen
Airbag-Samsung
- IMMO
Peugeot Citroen Audi
- Key Programming
BMW Benz
Note: Original Original DigiMaster III is hot selling at vtoolshop, you can go to have a check. you can contact me to get more details.

Launch la carte avec le dernier logiciel+launch smartbox et la carte mère

Où se procurer launch la carte avec le dernier logiciel +launch smartbox et la carte mère?
Obtiennent l’AFFAIRE de TUEUR de MONICA. 369 usd 98024XXX– Conseil de mère du launch X431 + panneau de smartbox +  card de Cf + actualisation de logiciel du launch x431 dernière
Service après-vente :
1. Garantie : deux ans, de la date d’arrivée du produit
2. Support technique: disponible et vie
3. Le plus basprix
4. Essais rigoureux de qualité
Conseil de mère X431
Les costumes de la carte mère X431 au maître X431, X431 et au GX3.This est carte mère multilingue. En attendant, ce conseil soutient la vieille et nouvelle carte de CF en divers volume de 128Mb à 512Mb.
Panneau du launch x431 smartbox
lancez x431 le smartbox, une partie du launch x431, utilisée pour le lancement products.
Avantages de panneau de boîte futé pour le module de balayage superbe (gx3)
- Original du lancement
- Bonne qualité
- La livraison opportune
- Le meilleur prix
X431 Carte de mémoire de CF
Lancez la carte de mémoire des CF X431 512MB compatible avec tous les produits du launch X431, tels que le module de balayage X431 superbe, X431 l’infini, X431 l’and  principalX431 GX3.
Actualisation de logiciel X431
Le plus défunt logiciel de mise à jour pour le software  de mise à jour de produit du launch X431
Note
de   : Nous provide and  d’actualisation de logicielle board  de  smartboxselon les clients de numéro de série nous fournissent
Veuillez laisser le numéro de série de Monica, tel que 98024XXX avant vous effectuant le paiement. autrement, nous arrangerons ces articles avec le numéro de série aléatoire
The est environ 2 à 5 jours par l’intermédiaire d’UPS DHL et de SME, 15-30days par l’intermédiaire d’AIR de POTEAU du HK à dans le monde entier
Notez svp: quenous espérons qu’il arrivent à l’heure mais puisque c’est une livraison internationale, embarquant le temps sera fortement dépendu de la compagnie de courier et des coutumes locales/des fonctions. Merci de votre compréhension

What Zed Bull Key Programmer can do?

Zed Bull can identify all transponders used in autmotive industry, copy all fixed coded transponders, copy some of 40, all 41, all 42, unlocked 44(VAG), all 45 and all 4D transponders.
Also Zed Bull can copy all type of Texas 4C transponders to batteryless TPX1 transponder.
Zed Bull can prepare transponder from EEPROM or MCU datas of car which directly starts car or ready to match wZed Bullh diagnostic devices.
Zed Bull Key Programmer can calculate pin codes from EEPROM, MCU, VIN number or key data of the car for some car models.
Device is supported wZed Bullh PC software, which you can find usefull informations about transponders and matching car models and remote programming procedures. Storing unlimZed Bulled(limZed Bulled wZed Bullh Pc harddrive capacZed Bully) customer information to database is another advantage of Zed Bull PC Software.
Zed Bull PC Software also has all functionalZed Bullies of the device Zed Bullself such as reading, identifying and wrZed Bulling to transponder.
Zed Bull PC Software is capable of reading and wrZed Bulling to new generation Philips HZed Bullag 2 crypto transponders.
One of the most usefull property of the PC Software is transponder production property. User can prepare their own transponders such as; 11, 12, 13, 4C, 33, 40, 41, 42, 44 VAG, 44 MZed Bullsubishi, 45, 46, 61, 62, 65 and 73 for diagnostic devices.
There are 2 types of tokens, one token is device token, which is free of charge and the other one is Pc token which is used for Eeprom & Mcu applications and transponder production applications(wZed Bullh charge).when device is turned on, before logging in number of tokens, 16 digZed Bull device serial number, device software version, device applications information (ZB:refers to Zed Bull which is consisted of transponder cloning functions, ZBE:refers to Zed Bull + Eeprom and MCU application, ZBET:refers to Zed Bull + Eeprom & Mcu Application + transponder production) are displayed on the Zed Bull screen.

User should contact local distributor for both device and Pc token. Tokens are loaded as in the steps below.
1.Choose 5th choice(settings) in the main menu.

2.Choose 4th choice(Load PC token) in the settings sub menu.

3.Device will give Outcode, outcode should be given to local distributor, Local distributor will give user In code, this In code should be entered carefully and correctly to the device, if 5 times repeatedly In code is entered wrong, device will want new In code. If In code is entered correctly tokens will be loaded to the device.

Zed BULL is a friendly car key programmer, it has been developed for all range of automotive locksmiths from beginners to advanced. It’s ease in use, technical support and unique properties makes it a powerfull device in the market.
Refer: http://www.cartool.info/2012/06/28/what-zed-bull-key-programmer-can-do/