China Launch Creader 5 - Creader v Use Tips

Have you ever seen the launch x431 tools ,The china launch creader vi which is a popular launch company's tool,it can help you to read the car fualt date and check the car code date ,if you have some problems with your car ,you should use it first and then use it to check your data. So ,first you should read the scanner simple brief to make it clear that you can understand the introduction of the scanenr. Here I show the images of the launch x431 creader 5:

The use tips of the x431 creader v: An important part of a vehicle’s OBD II system is the Readiness Monitors, which are indicators used to find out if all of the emissions components have been evaluated by the OBD II system. They are running periodic tests on specific systems and components to ensure that they are performing within allowable limits. Currently, there are eleven OBD II Readiness Monitors (or I/M Monitors) defined by the U.S. Environmental Protection Agency (EPA). Not all monitors are supported in every vehicles and the exact number of monitors in any vehicle depends on the motor vehicle manufacturer’s 6LAUNCH CreaderV User’s Manual emissions control strategy. Continuous Monitors -- Some of the vehicle components or systems are continuously tested by the vehicle’s OBD II system, while others are tested only under specific vehicle operating conditions. The continuously monitored components listed below are always ready: 1）Misfire
2）Fuel System
3）Comprehensive Components
(CCM) Once the vehicle is running, the OBD II system is continuously checking the above components, monitoring key engine sensors, watching for engine misfire, and monitoring fuel demands. Non-Continuous Monitors
-- Unlike the continuous monitors, many emissions and engine system components require the vehicle to be operated under specific conditions before the monitor is ready. These monitors are termed non-continuous monitors and are listed below: 1) EGR System
2) O2 Sensors
3) Catalyst
4) Evaporative System
5) O2 Sensor Heater
6) Secondary air Injection
7) Heated Catalyst
8) A/C system
 This video you can see it help you to understand the funciton and the feature of the creader v: http://www.youtube.com/watch?v=i7FdyvFJhPs So next time if have this x431 creader v you should check the information ,if you have any trouble to find the launch x431 creader v you can contact me kingstar@vtoolshop.com