Launch Creader vi - Launch Creader 6 Different from creader 5

The launch creader vi which can be used to check your car ,it's a good launch company's scanner  , I have just brought this tool ,and I used it to fault my car data ,so I can give you for the creader vi details and the technology tips.


Launch Creader VI OBD2 OBDII EOBD Code Reader Description:

OBD II Code Scan Tool ,Creader VI This product has applied the color LCD, humanized function menu design, which can support all functions for the vehicles with OBD&EOBD. It has multi-languages and LED indicators for diagnostic statuses. The above-mentioned makes this product to be popular. Meanwhile, the new platform application makes Creader VI run faster and diagnosed more effectively than before.

The Creader vi is different from the creader v 

Here creader vi images:

Here creader v images:

Launch Creader V Technology Tips:

The use tips of the x431 creader v: An important part of a vehicle’s OBD II system is the Readiness Monitors, which are indicators used to find out if all of the emissions components have been evaluated by the OBD II system. They are running periodic tests on specific systems and components to ensure that they are performing within allowable limits. Currently, there are eleven OBD II Readiness Monitors (or I/M Monitors) defined by the U.S. Environmental Protection Agency (EPA). Not all monitors are supported in every vehicles and the exact number of monitors in any vehicle depends on the motor vehicle manufacturer’s 6LAUNCH CreaderV User’s Manual emissions control strategy. Continuous Monitors -- Some of the vehicle components or systems are continuously tested by the vehicle’s OBD II system, while others are tested only under specific vehicle operating conditions. The continuously monitored components listed below are always ready: 1）Misfire

2）Fuel System

3）Comprehensive Components

(CCM) Once the vehicle is running, the OBD II system is continuously checking the above components, monitoring key engine sensors, watching for engine misfire, and monitoring fuel demands. Non-Continuous Monitors

-- Unlike the continuous monitors, many emissions and engine system components require the vehicle to be operated under specific conditions before the monitor is ready. These monitors are termed non-continuous monitors and are listed below: 1) EGR System

2) O2 Sensors

3) Catalyst

4) Evaporative System

5) O2 Sensor Heater

6) Secondary air Injection

7) Heated Catalyst

8) A/C system

So from this introduction, you won't think the creader 6 is the same as creader 5, and even they are the launch company but they have different function.