The Installation and hardware of the autocom cdp pro for cars

Now follow me to know the installation and hardware of the autocom cdp pro for cars.
1. Installation using DVD
NB! On certain computers, antivirus programs and other similar programs may sometimes cause the automatic start-up to not work or take a long time. In any such cases, deactivate these programs. Programs known to cause problems are McAfee VirusScan and ZoneAlarm. After installation, the antivirus programs can be reactivated.

1.1 Insert the DVD in the computer's DVD reader. The installation starts automatically. (If the installation does not start, choose "Run" in the "Start"-menu and write D:\Start. Applies if the DVD reader is designated as unit D).


1.2 Enter your Product-ID, serial number, and hardware key. Then choose country and press "Next" to continue.

1.3 Check in the next window that correct product is chosen. From this window it is possible to show application tables, user manuals, release information, etc. This is done by choosing a document in the list and then pressing "View". Before continuing, it is important that you have read the system requirements. Press the button "View" under the heading "System requirements" to show the system requirements. Then confirm that you have read the system requirements and press "Next" to start the installation guide. Follow the guide to finish the installation.

2. Hardware

2.1 Introduction
The diagnostic unit has built-in interfaces for most communications available on the market that are used for OBD (On Board Diagnostic). For certain vehicle models, specific connectors are used for obd scanner. As accessories there are many unique cables enabling connection to the car's diagnostic connection.
Connection to PC takes place using any of the alternatives USB (Universal Serial Bus) or Bluetooth (wireless communication).

2.2 Connections

1.  Bluetooth antenna
2.  OBD    16-pin obd-II connector (SAE J1962)
3.  Green/Yellow LED  Yellow light Indicates communication using USB
    Green/Yellow LED  Green light Indicates communication using Bluetooth
4.  Red LED    Power
5.  Green LED    Test
6.  USB-connection for PC